Successful use of monitoring data to update performance predictions of supported excavations depends equally on reasonable numerical simulations of performance, the type of monitoring data used as observations, and the inverse analysis techniques used to minimize the difference between predictions and observed performance. This paper summarizes each of these factors...
This paper describes developments of integrated tools for predicting, monitoring, and controlling ground movements associated with excavations in urban areas. Successful use of monitoring data to update performance predictions of supported excavations depends equally on reasonable numerical simulations of performance, the type of monitoring data used as observations, and the...
This paper describes qualification of devices to measure sub micro-meter changes in crack width, which is the basis of autonomous crack monitoring for control of blasting vibrations. Performance of LVDT, eddy current and potentiometer sensors to monitor long-term and transient displacements will be described. Potentiometers are attractive for wireless measurement,...
Crack and structural response to construction trench blasting was measured in a woodframe house with a stucco exterior. Blasts at distances between 232 m to 368 m produced peak particle velocities (PPV) and air blast over pressures (AB) of 9 mm/sec and 0.02 kPa (123 dB), respectively. Structural response velocities...
A unique judicial opportunity allowed measurement of the response of three cracks in residential structure to blasting for underground aggregate mining. Instrumented cracks were located in the interior basement CMU mortar and upstairs dry wall as well as exterior brick work. The dynamic environment was unusual. Even though the blasting...
Micro-meter dynamic crack responses in a two story structure to rock blasting- and wind gust- excitation are compared to those induced by long term climatological effects. These measurements substantiate the conservancy of the 12.5 mm/s (0.5 in./s) blasting vibration control to protect residential structures against cracking. The test structure was...
This paper describes the technology and methods deployed in the continuous autonomous remote monitoring of cracks in interior and exterior walls of a residence near a limestone quarry. The object is to quantitatively compare crack response to blast-induced ground motion to that induced by diurnal temperature changes, weather fronts, and...
This paper describes the technology and methods deployed in the continuous autonomous remote monitoring of cracks in interior and exterior walls of a residence near a limestone quarry. The objective is to quantitatively compare crack response due to blast-induced ground motion to that induced by diurnal temperature changes, weather fronts,...
This paper describes the details of installation and operation of a commercially- available wireless system to measure response of an interior cosmetic crack in a residential structure over a period of a year. Wireless data loggers managed the response of low power draw potentiometers that measured micrometer changes in crack...
Scour is by far the primary cause of bridge failures in the United States. Scour and other hydraulic effects are particularly threatening because the deterioration is often invisible, hidden beneath turbid water. Many scour monitoring methods attempt to measure the development of scour pockets themselves. However, this is difficult due...