Cracking is one of the most common concerns cited by owners of structures adjacent to construction or mining blasting. While a large database of case studies documenting the relative insignificance of ground motion induced by responsible blasting compared to weather effects on cracks in nearby structures has been established, the...
The gradual evolution of the material properties of a cement-based material, i.e. the stiffness of cement paste, is the result of the continuous change of the microstructure with the progress of the hydration process. Based on an existing micromechanical model for the simulation of the shear and elastic modulus of...
In this paper, the correlation of reflection loss measured by an ultrasonic shear wave reflection
method and the microstructure in cement-based material is investigated. Three cement pastes
(Portland cement type I) with different water-cement ratios (0.35, 0.50 and 0.60) cured at 25
°C were examined. The ultrasonic shear wave reflection...
An empirical procedure for fitting a complementary error function (erfc) to settlement and lateral ground movement data in a direction parallel to an excavation support wall is proposed based on extensive optical survey data obtained around a 12.8 m excavation in Chicago. The maximum ground movement and the height and...
Several three-dimensional effects were observed in the performance monitoring data collected during excavation for the Ford Engineering Design Center (FEDC) in Evanston, Illinois. These responses are related to lateral deformations of the soil around the excavation walls, forces in the cross-lot and diagonal bracing that supported the temporary wall and...
This paper presents the results of 159 finite element simulations conducted to define the effects of excavation geometry, i.e., length, width and depth of excavation, wall system stiffness, and factor of safety against basal heave on the 3-dimensional ground movements caused by excavation through clays. The results of the analyses...
Successful use of monitoring data to update performance predictions of supported excavations depends equally on reasonable numerical simulations of performance, the type of monitoring data used as observations, and the inverse analysis techniques used to minimize the difference between predictions and observed performance. This paper summarizes each of these factors...
Two numerical procedures are described that quantitatively identify a set of constitutive parameters that best represents observed ground movement data associated with a deep excavations in urban environments. This inverse problem is solved by minimizing an objective (or error) function of the weighted least-squares type that contains the difference between...
This paper describes developments of integrated tools for predicting, monitoring, and controlling ground movements associated with excavations in urban areas. Successful use of monitoring data to update performance predictions of supported excavations depends equally on reasonable numerical simulations of performance, the type of monitoring data used as observations, and the...
This paper reviews the new field of geo-measurement with metallic cable time domain reflectometry (TDR) for surveillance of transportation facilities. TDR is radar in a coaxial cable, and is especially advantageous for remote monitoring because of its inherently digital nature. Advances can be separated into those that leverage use of...